New-Tech Europe Magazine | February 2018

Tiger Board – Another board from the ASME Family – Arrow SmartEveryThing Community Boards based on the KW41Z from NXP . The KW41Z is an ultra low- power, highly-integrated single-chip device that enables Bluetooth ® low energy (BLE) v4.2 and IEEE ® 802.15.4 RF connectivity for portable, extremely low-power embedded systems. Applications include portable health care devices, wearable sports and fitness devices, AV remote controls, computer keyboards and mice, gaming controllers, access control security systems, smart energy and home area networks. The Tiger board supports the Arduino connection and have built-in WiFi connection so it can support a Smart End Node application with WiFi to Thread or BLE or can be a small Gateway as well. This board have been develop with cooperation of Arrow and IOTeam based in Italy. CYC1000 – This board is a low cost board based on Intel PSG (former Altera) based on the latest FPGA announcement of Cyclone 10LP Intel Cyclone 10 LP FPGAs are optimized for low static power, low-cost applications, such as I/O expansion, sensor fusion, motor/motion control, chip-to-chip bridging, and control. The CYC1000 is small and powerful FPGA module integrating an Intel Cyclone 10 LP FPGA, 8 MByte SDRAM, 8 MByte Flash and a LIS3DH 3-axis sensor. This board have been develop with cooperation of Arrow and Trenz Electronics in Germany. ANT96 – This special board is based on the 96boards CE Extend form factor with the new High End MPU family from Renesas - RZ-G1E. High processing performance with 1.0 GHz dual-core Arm ® Cortex ® -A7 CPUs, with 3D graphics and video codec engine. RZ/G1E embedded processors are equipped with a 3D graphics engine (PowerVR SGX540 at 260 MHz) and support full high-definition video

Image 3: Arrow SmartEveryThing Tiger board

encoding and decoding, making them ideal for human-machine interface (HMI) applications. This board is develop in cooperation with Mission Embedded company in Austria. HANI Board – The HANI board means HMI, Arrow, NXP, IoT Board is unique platform that based on many NXP solutions. The Board based on NXP LPC54618 high performance MCU running at 180Mhz with 512KFlash and 200KramFocus on HMI and connectivity, Support for multiple-sizes display (3.5’’ with 320x240 resolution, 4.3’’– 480x272 resolution, 5’’ – 800x400 resolution, 7’’- 800x400 resolution) with Wireless connectivity: RigadoR41Z Module, based on the NXP KinetisKW41Z SoC and supporting Bluetooth Low Energy 4.2 and IEEE 802.15.4 (Thread, ZigBee…) connectivity, SilexSX-ULPGN 802.11b/g/n module, based on the Qualcomm QCA4010 System-on-Chip (SoC) with 16-Mbit SPI Flash, NFC reader based on NXP CLRC663 & Wired connectivity: 2x CAN interfaces, Ethernet 10/100, USB host / device plus On-board debugger. The sensors are FXLS8471Q / FXLN8361Q: high performance industrial 3 axis accelerometer, FXAS21002CQ: high

performance 3 axis Gyro, FXPQ3115BV: bio compatible medical pressure sensor, NXP PCT2075GV: temperature sensor & AMS TSL25711FN: light sensor. The HANI board is develop with cooperation of Reloc from Italy. Arrow Electronics continues to innovate and develop community boards with the latest semiconductors NPI (New Product Introduction) so the develop community will be able to evaluate the latest technologies in the market based on the best solutions that Arrow suppliers provides.

Amir Sherman, Director of Engineering Solutions & Embedded Technology, Arrow

28 l New-Tech Magazine Europe