ניו-טק מגזין | ינואר 2018 | מהדורה דיגיטלית

Computers Components Computers Electro Optic & Camera Packaging & Producti Electro Optic & Camera Packaging & Production Motion Automotive

Automotive

IoT

New Products Motion Components Motion Automotive Computers

Motion

n

Components

Communication

from 2000 to 6000MHz. This model provides low insertion loss of 0.2dB and 26dB port-to-port isolation. With 1.2dB amplitude unbalance and 1.5° phase unbalance )relative to 90°(, the hybrid produces nearly equal output signals with 90° phase shift, ideal for I/Q systems, balanced amplifiers, antenna feeds, and many more applications. The splitter is designed in to a miniature printed laminate measuring only 0.56x0.35x0.091” with wraparound terminations for good solderability and easy visual inspection. "MCDI" : לפרטים נוספים 077-540-6075 : ט 153-77-540-6051 : פ

precision fixed attenuator dice extend coverage to a wide array of applications from DC to 43.5GHz including 5G systems, microwave communications, satellite, defense and aerospace, and more. These fixed-value, absorptive attenuators are fabricated through highly repetitive MMIC processing with thin-film resistors on GaAs substrates and achieve ultra- wideband performance with a single, contiguous ground-plane, simplifying installation into customer hybrids. Model KAT-7-D+ provides 7dB attenuation with ±0.2dB flatness up to 26.5GHz, ±0.5dB flatness up to 43.5GHz, 1.3W RF power handling, and 1.1:1 typical VSWR. KAT-series attenuator dice are available in gel-paks of 5, 10, 50 and 100 KGD as well as partial and full production wafers. "MCDI" : לפרטים נוספים 077-540-6075 : ט 153-77-540-6051 : פ

Mini-Circuits’ Miniature Lumped Element Low Pass Filter Passes DC to 900MHz with Sharp Rejection Mini-Circuits’ ULP-900+ is a surface- mount, lumped element low pass filter with a passband from DC to 900 MHz. This design provides very sharp rejection with 90% slope from the 3dB cutoff to 20dB rejection, and greater than 30dB rejection typically from 1200 to 2900MHz. It provides 1.5dB typical insertion loss in the passband and handles RF input power up to 1.5W. The unit gives designers the advantages of excellent selectivity and high stopband rejection in a miniature form factor occupying only 0.25x0.25” of board space. Designed using miniature, high-Q capacitors and chip inductors, it provides high reliability, repeatable performance across production lots and consistent performance across temperatures from -40°C to +85°C. The filter comes mounted on printed wiring laminate with Mini-Circuits’ TopHat feature to maximize speed and efficiency of pick-and-place assembly. "MCDI" : לפרטים נוספים 077-540-6075 : ט 153-77-540-6051 : פ

office@mcdi-ltd.com www.minicircuits.com

office@mcdi-ltd.com www.minicircuits.com

Mini-Circuits’ Precision Connector Gauge Kits Check Contact Tolerances Mini-Circuits’ ACUDIAL-N connector gauge kit includes precision hardware for measuring center pin and dielectric location of outer conductor mating surfaces of N-type coaxial connectors. The kit contains a dial indicator assembly, female and male master gauges for the appropriate connectors, instruction manual, and a wooden instrument case. ACUDIAL- series connector gauges feature 0.0001-in. resolution and repeatability

office@mcdi-ltd.com www.minicircuits.com

Mini-Circuits’ 200W Surface- Mount 2-Way 90° Hybrid, 2000 to 6000MHz Mini-Circuits’ QCH-63 is a high- power, surface-mount 2-way 90° hybrid capable of handling up to 200W RF input power for applications over a wide bandwidth

Mini-Circuits’ Ultra- Wideband MMIC Precision Fixed Attenuator Die, DC to 43.5GHz Mini-Circuits’ KAT-D series of MMIC

New-Tech Magazine l 88