ניו-טק מגזין | יוני 2018

C Components Electro Optic & Camera Packaging & Producti

New Products Automotive

mputers

IoT

Computers Components Computers Electro Optic & Camera Packaging & Production Motion Automotive New Products

Automotive

IoT

Test & Mesurement

Motion

Motion Automotive Componenst Computers

Motion

n

Communication

Mini-Circuits Introduces USB Controlled Solid State 2-SP2T Switch, DC to 8GHz Mini-Circuits’ new line of solid-state switchproducts continues togrow togive you more options for your signal routing needs in test systems where extremely fast switching is a requirement. Model USB-2SP2T-DCH is a USB-controlled, solid state switch matrix containing two independent SPDT absorptive RF switches operating over frequencies from DC to 8GHz. It provides ultra-fast switching speed of just 14µs, very high isolation of 50dB typ., high IP3 of +50 dBm, and RF input power handling up to +35dBm. The unit comes housed in a rugged aluminumalloy case (4.58x2.00x0.475”) with SMA-F connectors at all RF ports. Controlled and powered via USB, the switch comes supplied with Mini-Circuits’ user-friendly GUI software and DLLs for 32- and 64- bit Windows ® systems, as well as complete programming instructions for Windows and Linux ® programming environments, supporting control through the user’s native control software. "MCDI" : לפרטים נוספים 077-540-6075 : ט 153-77-540-6051 : פ office@mcdi-ltd.com

Mini-Circuits’ USB/Ethernet Attenuator Covers 0.1 to 30 GHz with 30 dB Attenuation Control Mini-Circuits’ RCDAT-30G-30 is a precision programmable attenuator covering an extremely wide bandwidth from 0.1 to 30GHz with attenuation range from 0 to 30dB in 0.5dB steps. The device is controlled via either USB or Ethernet allowing easy control directly from the user’s PC or remotely over a network. It also allows daisy chainingof up to25attenuators through one USB or Ethernet connection to a single master unit. The programmable attenuator is an ideal solution for transmission loss simulation and handover system evaluation in a wide range of applications from 5G infrastructure testing to microwave point-to-point links and many more. The device comes supplied with Mini-Circuits user-friendly GUI control software for Windows ® systems and a full API with programming instructions for Windows and Linux ® environments (both 32-bit and 64-bit systems). "MCDI" : לפרטים נוספים 077-540-6075 : ט 153-77-540-6051 : פ office@mcdi-ltd.com Programmable

Mini-Circuits’ USB/Ethernet Peak Power Sensor, -60 to +20dBm, 10MHz to 8GHz Mini-Circuits’ PWR-8P-RC is a low cost, compact sensor head capable of turning any PC into a high-performance power meter. Analyze and graphically plot peak and average power, duty cycle, pulse width, crest factor, rise and fall times of pulsed, modulated and CW signals. The sensor offers 80dB dynamic range allowing power measurements as low as -60dBm and as high as +20dBm, and a fast sampling rate of 2µs, supporting a diverse range of measurement applications. Its dual control interface means the device can be used via USB connection to the user’s PC or for remote power measurements across a network without requiring a direct PC connection. The power sensor comes supplied with user-friendly GUI application software for Windows ® systems, providing a simple means to analyze the full signal characteristics, plotting the signal traces and exporting data. Alternatively, an included API supported by most programming environments allows the full measurement capability to be automated and integrated within the user’s native test software. "MCDI" : לפרטים נוספים 077-540-6075 : ט 153-77-540-6051 : פ office@mcdi-ltd.com

New-Tech Magazine l 92