New-Tech Europe Magazine | July 2017

new products

ON Semiconductor Improves Imaging Performance for High Resolution Industrial Applications ONSemiconductor (Nasdaq:ON), drivingenergyefficient innovations, is improving performance for industrial imaging applications that require both high resolution image capture and maximum image uniformity. The new 29 megapixel KAI-29052 image sensor provides up to twice the imaging sensitivity of the existing KAI- 29050 in the wavelength range of 500 nanometer (nm) to 1050 nm. This improved performance is particularly beneficial to applications operating in near-infrared (NIR) wavelengths, such as 850 nm. This enhanced pixel design retains isolation of charge from one photodiode to another, enabling this increase in sensitivity without any reduction to image sharpness (Modulation Transfer Function, or MTF). In addition, an improved amplifier design reduces read noise by 15%, increasing the linear dynamic range available from the device to 66 decibel (dB). With these enhancements, the KAI-29052 serves as a new performance benchmark for high resolution image capture. “The evolving needs of industrial imaging applications such as high end security, machine vision, and aerial surveillance and mapping require continued advancements in the portfolio of image sensors serving this market,” said Herb Erhardt, Vice President and GM, Industrial Solutions Division, Image Sensor Group at ON Semiconductor. “The enhanced performance available from the KAI-29052 is a further demonstration of ON Semiconductor’s ongoing commitment to provide the most advanced CCD and CMOS image sensors for these demanding markets.” The KAI-29052 is now available in a RoHS-compliant CPGA- 72 package in Monochrome, Bayer Color, and Sparse Color configurations, and is fully pin compatible not only with the existing KAI-29050 image sensor but also a full family of 5.5 micron and 7.4 micron CCD image sensors, enabling camera manufacturers to quickly adopt the new device. Evaluation kits for ON Semiconductor’s full family of Interline Transfer CCD image sensors are now available, allowing the performance of devices such as the KAI-29052 to be examined and reviewed under real-world conditions. Customers can order an evaluation kit by contacting their local ON Semiconductor sales representative or authorized distributor. More information on the KAI-29052 is available on the company’s blog.

Belden Compliant with Mandatory New EU Radio Equipment Directive Belden Inc., a global leader in signal transmission solutions for mission-critical applications, confirmed today its compliance with the new Radio Equipment Directive (RED) 2014/53/EU. All Hirschmann wireless solutions fully adhere to the new guidelines, including the OpenBAT, BAT450-F, BAT867R and BAT-C Industrial Wireless LAN access points/ clients, as well as all OWL Industrial Cellular Routers. The new RED replaces the former R&TTE (Radio and Telecommunication Terminal Equipment Directive 1999/5/EC) after a year-long transition period. All radio products shipped to the European Union on or after June 13 must conform with the new directive. While some radio equipment manufacturers faced challenges in meeting the deadline, all Hirschmann affected radio devices are RED-compliant on time. Per the European Commission, the new RED ensures a single market for radio equipment by setting essential requirements for safety and health, electromagnetic compatibility and the efficient use of the radio spectrum. This applies to all products using the radio frequency spectrum, including Hirschmann products. To meet the new requirements defined by RED, Hirschmann devices with the HiLCOS operating system (OpenBAT, BAT450-F and BAT867-R) are now being produced with new software versions (09.12.5700 and 09.14.5700).

New-Tech Magazine Europe l 81